[219]Effect of Fly Ash Recirculation Port and Secondary Air Optimization on the Flow Characteristics and Secondary Combustion of Fly Ash in Biomass Boilers
Yixue Zhang Qingdao University of Science and Technology, China
PO/PO2
11 Oct 2025, 13:35-13:36
ATTENDEE Poster Presentation
[218]Non-intrusive reduced-order modeling of space-time-dependent parameterized problems
Xiaomin Wang Yonsei University, South Korea
PO/PO2
11 Oct 2025, 13:38-13:39
ATTENDEE Poster Presentation
[217]Immersed Boundary Projection Method for Fluid-Structure Interaction Problems
Yuchen Zhang Yonsei University, South Korea
PO/PO2
11 Oct 2025, 13:37-13:38
ATTENDEE Poster Presentation
[216]The Effect of Manifold Inclination on Cooling Performance of U-type Air-cooled Battery Pack
Jeonghun Ko Jeonbuk National University, Republic of Korea
S7/S7
11 Oct 2025, 15:55-16:10
ATTENDEE Oral presentation
[215]A Numerical Investigation into the Influence of Porous Media Geometry on Transpiration Cooling Across Varying Blowing Ratios
Jisu Park Jeonbuk National University, Republic of Korea
S7/S7
11 Oct 2025, 15:40-15:55
ATTENDEE Oral presentation
[214]Electrochemical-mechanical coupled phase-field modeling for lithium dendrite growth in all-solid-state lithium metal batteries
Guoqing Qi University of Science and Technology Beijing, China
S2/S2-2
11 Oct 2025, 16:20-16:35
ATTENDEE Oral presentation
[213]Skin-friction drag reduction effect of turbulent channel flow by periodically varying wall temperature
Satsuki Aoyama The University of Electro-Communications, Japan
S9/S9
11 Oct 2025, 09:10-09:25
ATTENDEE Oral presentation
[212]Reinforcement Learning-based Precision Temperature Control for Thermoelectric Heat Exchangers
SeokYong Lee Kyungpook National University, South Korea
S8/S8-2
12 Oct 2025, 14:45-15:00
ATTENDEE Oral presentation
[211]Urban Microclimate Simulation for UAM Operation Safety Assessment Using LES Data–Driven POD–Transformer Modeling
Kim Jungwoo Yonsei University, South Korea
S8/S8-1
12 Oct 2025, 08:50-09:05
ATTENDEE Oral presentation
[210]Heat transfer in a PCM-based finned heat sink enhanced with metal foam
Nadezhda Bondareva Tomsk State University, Russian Federation
S7/S7
11 Oct 2025, 14:40-14:55
ATTENDEE Oral presentation
[209]Butterfly flapping flow simulation based on the GPU accelerated lattice Boltzmann method
Ruizhen Huang Harbin Engineering University, China
S6/S6-2
12 Oct 2025, 16:10-16:25
ATTENDEE Oral presentation
[208]Micropillar-patterned electrodes to enhance mass transfer in low Pt-loaded fuel cells
Meng Ni The Hong Kong Polytechnic University, China
S10/S10
11 Oct 2025, 08:30-09:00
ATTENDEE Keynote speech
[207]Topology optimization of heat and mass transfer processes: models and applications
Li Chen Xi' an Jiaotong University, China
S8/S8-1
12 Oct 2025, 08:00-08:30
ATTENDEE Keynote speech
[206]Study on the Mechanism of Leakage, Ignition, and Explosion in High-Pressure Hydrogen-Blended Natural Gas Pipelines
Jingfa Li Yangtze University, China
S7/S7
11 Oct 2025, 13:30-14:00
ATTENDEE Keynote speech
[205]Insights into the oxygen transport through thin films on platinum surfaces
Wenzhen Fang Xi'an Jiaotong University, China
S10/S10
11 Oct 2025, 09:20-09:40
ATTENDEE Invited speech